AMSOIL ISO 46 100% Synthetic Anti-Wear Hydraulic Oil

AMSOIL ISO 46 Anti-Wear Hydraulic Oil

Excellent Performance in Extreme Cold

Not all hydraulic oils can cut it when the temperature plunges far below zero. We formulated Synthetic AW Series Anti-Wear Hydraulic Oil to flow quickly in bitter cold to help prevent pressure spikes, erratic operation and ruptured hoses and seals. Since ambient temperatures can fluctuate wildly, we also formulated the oil to resist oxidation in the presence of high heat for the best of both worlds. It’s the perfect choice for maximizing the life and reliability of equipment that operates in temperature extremes.

‍

• Anti-wear protection for high-pressure systems
• Stays fluid in extreme cold
• Maintains cleanliness
• Promotes maximum fluid life

‍

Excellent Cold-Weather Performance

Synthetic Anti-Wear Series Hydraulic Oil doesn't contain the waxes inherent to conventional oils that thicken in cold weather. It stays fluid in sub-zero temperatures for nearly immediate flow at startup. As a result, pumps, bearings, valves and other components receive vital lubrication at startup for long life. Reliable fluid flow reduces instances of pressure spikes that can damage pumps and rupture hoses and seals, helping reduce maintenance.

Maximum Cleanliness

Synthetic AW Series Hydraulic Oil is formulated with naturally resilient base oils that resist chemical breakdown, helping keep hydraulic systems free of damaging varnish. It's fortified with a premium additive system that fights oxidation to help prevent acid formation. With Synthetic AW Series Oils, your hydraulic systems stay clean and deliver reliable, long-lasting performance.

Fights Damaging Heat

Synthetic AW Series Hydraulic Oil contains potent anti-oxidant additives that resist the damaging effects of high heat. Its synthetic base oils maintain viscosity despite elevated heat to keep components protected against wear. The oil’s ability to resist heat maximizes fluid life.

TYPICAL TECHNICAL PROPERTIES

Synthetic ISO 46 Anti-Wear Hydraulic Oil (AWI)

‍

‍

APPLICATIONS

Use the correct viscosity of AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oil in high- and low-pressure gear, vane and piston stationary hydraulic mobile hydraulic systems that require a listed specification. They are excellent for general-purpose use where extended drain intervals are desired and in severe-duty operation where temperature extremes are encountered.

AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils and most synthetic hydraulic oils (not compatible with phosphate-ester, silicone or water-based fluids). For optimum performance, it is recommended the system be thoroughly drained and, if warranted, cleaned prior to installation. Oil analysis is recommended to maximize oil drain intervals.

• Denison* HF-0, HF-1 and HF-2
• Vickers* M-2950-S and I-286-S
• Cincinnati Milacron* P-68, P-69 and P-70
• U.S. Steel* 127
• Racine, variable volume vane pumps DIN 51524, Parts V and 3 HLP22-HLP46
• ASTM D-6158 H
• AFNOR E 48-603 (except for PM-500 series silver-containing pumps, which require R&O additive systems)
• Ford M6C32
• GM LH-04-1, LH-06-1 and LH-15-1
• Lee Norse* 100-1
• Jeffrey No. 87
• BF Goodrich 0152
• Commercial Hydraulics* (except for PM-500 series silver-containing pumps, which require R&O additive systems)

HEALTH & SAFETY

This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available via the Internet at AMSOIL.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.

PRODUCT WARRANTY

AMSOIL products are backed by a Limited Liability Warranty. For complete information visit AMSOIL.com/warranty.aspx.

‍